# 【Openwrt】Gl-inet刷机Openwrt纯净版教程

> 1\. 下载OpenWrt官方网站上的固件在这里下载 openwrtar71xxgenericglinet6416Av1squashfssysupgrade（原文附带下载：openwrtar71xxgenericglinet6416Av1squashfssysupgrade.zip，年代久远已不再提

1\. 下载OpenWrt官方网站上的固件在这里下载  
openwrt-ar71xx-generic-gl-inet-6416A-v1-squashfs-sysupgrade（原文附带下载：openwrt-ar71xx-generic-gl-inet-6416A-v1-squashfs-sysupgrade-.zip，年代久远已不再提供下载）  
2\. 拔掉路由器上的一切连线。

3\. 电脑连接路由器LAN口，并设置电脑的IP地址为 192.168.1.2

4\. 按住路由器的 reset 键，插入电源开机，此后会看到绿灯闪烁，待红灯亮起时松开reset键，此时路由器进入uboot web界面

5\. 电脑上使用浏览器打开地址 http://192.168.1.1，将会看到：

[[附件缺失 #1-500x248.png 1]][[附件缺失 #1.png]]

6.选择刚才下载的文件后，点击 Upload按钮，开始刷机。

7\. 刷机的过程中路由器的指示灯会频繁闪烁，待闪烁停止后，刷机完成，路由器会自动重启，重启的过程中，电脑上可以看到网络连接回暂时断开，然后会自动恢复。

8\. 带网络连接恢复后，将网络连接重新设置为自动获得IP地址。

9\. 电脑网络连接自动获得192.168.1.0/24的地址成功后，telnet 到192.168.1.1，如果连接成功，并看到OpenWrt提示符，则刷机成功  
10.telnet后输入passwd 修改密码 然后就可以用putty连接路由器了

11.putty连接后依次输入以下命令，系统会自动安装所需的软件包。  
```
opkg update
opkg install luci
```  
12.在电脑端的浏览器中输入“192.168.1.1”，可访问路由器就表示安装成功  
[[附件缺失 #2-500x208.jpg 2]]  
13.默认界面是英文的这个时候输入root用户名密码就是你刚刚用“passwd”命令修改的密码  
[[附件缺失 #3-500x245.jpg 3]]  
14.按照上图标注点击进入后修改  
```
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz chaos_calmer_base http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/base
src/gz chaos_calmer_luci http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/luci
src/gz chaos_calmer_management http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/management
src/gz chaos_calmer_packages http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/packages
src/gz chaos_calmer_routing http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/routing
src/gz chaos_calmer_telephony http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/telephony
```  
为  
```
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz chaos_calmer_base http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/base
src/gz chaos_calmer_luci http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/luci
src/gz chaos_calmer_management http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/management
src/gz chaos_calmer_packages http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/packages
src/gz chaos_calmer_routing http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/routing
src/gz chaos_calmer_telephony http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/telephony
src/gz barrier_breaker_base http://www.gl-inet.com/openwrt/2.0/packages/base
src/gz barrier_breaker_luci http://www.gl-inet.com/openwrt/2.0/packages/luci
src/gz barrier_breaker_management http://www.gl-inet.com/openwrt/2.0/packages/management
src/gz barrier_breaker_oldpackages http://www.gl-inet.com/openwrt/2.0/packages/oldpackages
src/gz barrier_breaker_packages http://www.gl-inet.com/openwrt/2.0/packages/packages
src/gz barrier_breaker_routing http://www.gl-inet.com/openwrt/2.0/packages/routing
src/gz barrier_breaker_telephony http://www.gl-inet.com/openwrt/2.0/packages/telephony
```  
之后再用putty连接路由器输入以下命令：  
```
opkg update
opkg install luci-i18n-chinese
```  
然后进入后台选择中文刷新即可  
[[附件缺失 #4-500x392.jpg 4]]

---

**分类**：硬件
**作者**：子龙
**链接**：https://octohz.com/p/3311